en Home Connect Note: If you have any unfavourable results, reposition the cookware on a smaller cooking zone, if available. To reactivate this function, touch the settings area. Result The cookware is not suitable for the cooking zone and therefore does not heat up. The cookware is taking longer to heat up than ex- pected and cooking is not progressing as well as it ought to. The cookware is heating up correctly and cooking is progressing well. Home Connect 20 Home Connect This appliance is network-capable. Connecting your ap- pliance to a mobile device lets you control its functions via the Home Connect app, adjust its basic settings and monitor its operating status.
The Home Connect services are not available in every country. The availability of the Home Connect function depends on the availability of Home Connect services in your country. You can find information about this at: www.home-connect.com. 20.2 Setting up Home Connect Requirements Ў The appliance is connected to the power supply and is switched on. Ў You have a mobile device with a current version of the iOS or Android operating system, e.g. a smart- phone. Ў The Home Connect app has been installed on your mobile device. Ў The appliance is receiving signals from the WLAN The Home Connect app guides you through the entire login process.
Follow the instructions in the Home Con- nect app to configure the settings. Tip: Please also follow the instructions in the Home Connect app. Notes Ў Please note the safety precautions in this instruction manual and make sure that they are also observed when operating the appliance via the Home Con- nect app. → "Safety", Page 2 Ў Operating the appliance on the appliance itself al- ways takes priority. During this time it is not possible to operate the appliance using the Home Connect app. Ў In networked standby mode, the appliance requires a maximum of 2 W. Ў Hobs are not designed to be left unattended. Al- ways monitor the cooking process. home network (Wi-Fi) at its installation location.
Ў The mobile device and the appliance are within range of your home network's Wi-Fi signal. 1. Open the Home Connect app and scan the follow- ing QR code. 2. Follow the instructions in the Home Connect app. 20.3 Wi-Fi symbol 20.1 Setting up the Home Connect app The Wi-Fi indicator on the main screen changes ac- cording to the status and quality of the connection and the availability of the Home Connect server. 1. Install the Home Connect app on your mobile device. 2. Start the Home Connect app and set up access for status Description Lights up steadily at half brightness. Home Connect. The Home Connect app guides you through the en- tire login process. No network connection saved.
Flashes at full brightness. Network connection is be- ing established. Lights up steadily at full brightness. Network connection saved and Wi-Fi active. Flashes. Network settings are re- set. Switched off. Network not active. 20.4 Adding or removing a Wi-Fi home network The following overview shows how to add or remove a Wi-Fi home network. 16