Home Connect en Wi-Fi home network status Action As soon as a software update is available, you will be informed via the Home Connect app and will be able to start the software update via the app. Once the update has been successfully downloaded, you can start in- stalling it via the Home Connect app if you are in your home network (Wi-Fi). The Home Connect app informs you once installation is successful. Notes Ў The software update consists of two steps. – The first step is the download. – The second step is the installation on your appli- ance. Ў You can continue to use your appliance as normal while updates are downloading.
Depending on your personal settings in the app, software updates can also be set to download automatically. Ў Installation takes a few minutes. You cannot use your appliance during installation. Ў We recommend that you install security updates as soon as possible. No Wi-Fi home network stored. To add the Wi-Fi home network, briefly press . The Wi-Fi home network has now been saved. To pair another appliance, press and hold . The Wi-Fi home network has now been saved. To reset the Wi-Fi home network settings, press and hold . If flashes, press and hold again.
20.5 Changing settings via the Home Connect app You can use the Home Connect app to change the set- tings for the cooking zones and send them to the hob. Requirement: The hob is connected to the Wi-Fi and to the Home Connect app. 1. Select the setting in the Home Connect app and send it to the hob. Follow the instructions in the Home Connect app. Settings that you send from the Home Connect app to the hob must be confirmed on the hob.
a As soon as cooking settings are transmitted to a 20.8 Remote diagnostics Customer Service can use Remote Diagnostics to ac- cess your appliance if you contact them, have your ap- pliance connected to the Home Connect server and if Remote Diagnostics is available in the country in which you are using the appliance. Tip: For further information and details about the avail- ability of Remote Diagnostics in your country, please visit the service/support section of your local website: www.home-connect.com. cooking zone, the display starts to flash, depending on the setting. 2. Press to confirm the setting. 3. To discard the setting, press any other touch field on the hob.
20.6 Activating automatic presence detection 1 Thanks to the automatic presence detection function, you no longer need to confirm parameters on the hob from your mobile device, provided you are near the hob. If you send settings to a cooking zone, you can confirm these directly from your mobile device. Requirements Ў The hob is connected to the Wi-Fi and to the 20.9 Data protection Please see the information on data protection. The first time your appliance is registered on a home network connected to the Internet, your appliance will transmit the following types of data to the Home Connect server (initial registration):
Ў Unique appliance identification (consisting of appli- ance codes as well as the MAC address of the Wi-Fi communication module installed). Ў Security certificate of the Wi-Fi communication mod- ule (to ensure a secure data connection). Ў The current software and hardware version of your appliance. Ў Status of any previous reset to factory settings. Home Connect app. Ў The Bluetooth is connected to the mobile device. Ў The user is near the hob. 1. Open the Home Connect app. 2. In order to set the automatic presence detection, fol- low the instructions in the Home Connect app.
This initial registration prepares the Home Connect functions for use and is only required when you want to use the Home Connect functions for the first time. Note: Please note that the Home Connect functions can only be utilised with the Home Connect app. In- formation on data protection can be retrieved in the Home Connect app. 20.7 Software update Your appliance's software can be updated using the software update function, e.g. for the purposes of op- timisation, troubleshooting or security updates. To do this, you must be a registered Home Con- nect user, have installed the app on your mobile device and be connected to the Home Connect server. 1 Available depending on software version.
Further information on availability can be found on the website. 17