en Basic operation 13.3 Removing tableware 14.2 Setting a programme WARNING Risk of injury! Hot tableware can cause burns to the skin. When hot, tableware is sensitive to shock, may crack and can result in injury. ▶ When the programme has ended, To adjust the washing programme to the soiling level of the tableware, se- lect a suitable programme. Requirement: The appliance door is closed. ▶ Press the right programme button. a The programme is set and the pro- do not empty the appliance until the tableware has cooled down for a while. gramme button flashes. 14.3 Setting additional func- tions 1. To prevent water dripping on the tableware, unload it starting at the bottom and working up. 2.
Check the washing tank and ac- You can set additional functions to complete the washing programme selected. Note: The additional functions which can be used depend on the pro- gramme selected. cessories for soiling and clean if necessary. → "Cleaning and servicing", Page 42 additional function. → "Additional functions", Page 22 a The additional function is set and ▶ Press the button for the relevant Basic operation 14 Basic operation Basic operation the additional function button flashes. 14.1 Switching on the appli- ance ▶ Press . 14.4 Setting timer program- ming The Eco 50° programme is set by default.
The Eco 50° programme is espe- cially environmentally friendly and ideal for normally soiled tableware. It is the most efficient programme for the combination of energy/wa- ter consumption for this type of tableware and evidences conform- ity with the EU Ecodesign Direct- ive. If you do not perform any actions on the appliance for 10 minutes, the appliance will automatically switch off. You can delay the start of the pro- gramme by up to 24 hours. 1. Press . 2. Press or repeatedly until the display shows the right time. Depending on the setting of the time display, the end of the pro- gramme is shown on the display by "Finish in" (e.g. 3h 25min) or "Finish at" (e.g. 15:20 hours).
You can change this setting in the Ba- sic settings. 3. To activate timer programming, press . 36