Basic operation en Note: To deactivate timer program- ming, press for approx. 4 seconds. 14.7 Terminate programme To end a programme early or to switch from a programme that has already started, you will need to can- cel it first. ▶ Press for approx. 4 seconds. a All displays light up. a As soon as the displays are off, 14.5 Starting the programme ▶ Press . a The programme has ended when the display shows "Finished". Notes Ў If you want to add more tableware the display shows "Program was terminated. " and then "Finished". a The programme is cancelled and while the appliance is running, do not use the tablet collecting tray as a handle for the top basket.
You might touch the partially dissolved tablet. Ў You can only change a pro- ends after approx. 1 minute. 14.8 Switching off appliance 1. Please note the information on gramme when running if you can- cel it. → "Terminate programme", Page 37 Ў The appliance switches off auto- Safe use → Page 10 . 2. Press . Tip: If you press during the wash cycle, the programme currently run- ning will be interrupted. When you switch the appliance back on, the programme continues automatically. matically 1 minute after the end of the programme to save energy. If you open the appliance door im- mediately after the programme has ended, the appliance will switch off after 4 seconds.
14.6 Interrupting programme Note: When you open the appliance door once the appliance has heated up, leave the door slightly ajar for a few minutes and then close it. This will help prevent excess pressure building up in the appliance and stop the appliance door bursting open. 1. Press . a The programme is saved and the appliance switches off. 2. Press to resume the pro- gramme. 37