Environmental protection and saving energy en ▶ So as not to scratch the finish on the appliance, do not use sponges with a rough surface or abrasive cleaning agents. ▶ To prevent corrosion, do not use 4 Installation and con- nection sponge cloths on dishwashers with a stainless steel front or rinse such cloths thoroughly several times be- fore using them for the first time. To ensure proper operation, connect the appliance to the power and water supply correctly. Observe the spe- cified criteria and the installation in- structions. 4.1 Scope of supply 3 Environmental protec- tion and saving energy After unpacking all parts, check for any damage in transit and complete- ness of the delivery.
If you have any complaints, contact the dealer who sold you the appli- ance or our Customer Service. Note: The appliance has been tested at the factory to check it is in working order. It is possible that water has left marks on the appliance. These marks will disappear after the first wash cycle. The delivery consists of the following: Ў Dishwasher Ў Operating instructions Ў Installation Instructions Ў Further information documents Ў Installation material Ў Steam guard plate Ў Mains cable Ў Quick reference guide 3.1 Disposing of packaging The packaging materials are environ- mentally compatible and can be re- cycled. ▶ Sort the individual components by type and dispose of them separ- ately.
3.2 Saving energy If you follow these instructions, your appliance will use less electricity and less water. Use the Eco 50° programme. a The Eco 50° programme is en- ergy-efficient and environmentally friendly. → "Programmes", Page 17 4.2 Installing and connecting If you do not have much tableware to wash, use the additional Half Load function. 1 You can position your built-under or integrable appliance in a fitted kit- chen between wooden and plastic walls. If you subsequently install your dishwasher as a free-standing appli- ance, you must stop it from tipping over, e.g.
by screwing it to the wall or the appliance a The programme will adjust to a lower load and consumption will be reduced. → "Additional functions", Page 19 1 Depending on the appliance specifications 11