en Installation and connection 3.4 Efficient Dry Ў Dishwasher Ў Operating instructions Ў Installation Instructions Ў Further information documents Ў Installation material Ў Steam protection Ў Salt filling aid funnel Ў Mains cable Ў Quick reference guide The appliance door opens automatic- ally during the drying phase. This en- sures a particularly economical dry- ing result. For best drying results wait until the end of programme before unloading the tableware. The programme has ended when the display shows "00h:00m". If automatic door opening is deactiv- ated, energy consumption increases and the drying phase is usually shortened.
→ "Overview of the basic settings", Page 35 If this additional function has been selected, automatic door opening is deactivated. → "Additional functions", Page 21 4.2 Installing and connecting the appliance You can position your built-under or integrable appliance in a fitted kit- chen between wooden and plastic walls. If you subsequently install your dishwasher as a free-standing appli- ance, you must stop it from tipping over, e.g. by screwing it to the wall or installing it under a continuous work- top that is securely connected to ad- jacent cabinets. 1. Follow the safety instructions. Installation and connection 4 Installation and con- → Page 4 2.
Follow the instructions for electrical nection Installation and connection To ensure proper operation, connect the appliance to the power and water supply correctly. Observe the spe- cified criteria and the installation in- structions. connection. 3. Check the Scope of supply and the condition of the appliance. 4. Consult the installation instructions for the installation dimensions re- quired. 5. Make the appliance level using the 4.1 Scope of supply height-adjustable feet. Make sure that the appliance is standing on the floor securely. 6. Install the drainage connection. After unpacking all parts, check for any damage in transit and complete- ness of the delivery.
If you have any complaints, contact the dealer who sold you the appli- ance or our Customer Service. Note: The appliance has been tested at the factory to check it is in working order. It is possible that water has left marks on the appliance. These marks will disappear after the first wash cycle. The delivery consists of the following: → Page 13 7. Install the drinking water connec- tion. → Page 13 8. Connect the appliance to the power supply. 12