Installation and connection en 4.3 Drainage connection 4.5 Electrical connection Connect your appliance to drainage connection so dirty water is dis- charged via the wash cycle. Connecting the appliance to the electricity supply Notes Ў Follow the Safety instructions Installing the drainage connection 1. Consult the installation instructions → Page 4 . Ў Please note that the water safety supplied for the steps required here. 2. Connect the wastewater hose to system is only functional if there is a power supply. the outlet connection of the siphon using the enclosed parts. 3. When doing so, check that the 1. Insert the non-heating appliance plug of the power cable into the appliance. 2.
Insert the mains plug of the appli- wastewater hose is not kinked, crushed or twisted. 4. Also check that there is no cover ance's power cable in a socket nearby. The connection data of the appli- ance can be found on the rating plate. 3. Check the mains plug is inserted in the drainage system preventing the wastewater from being dis- charged. 4.4 Drinking water connec- properly. Connect your appliance to a drinking water connection. tion Installing the drinking water connection Note Ў If you are replacing the appliance, you must use a new water supply hose. 1. Consult the installation instructions supplied for the steps required here. 2.
Connect the appliance to the drink- ing water connection using the en- closed parts. Observe the Technical data. 3. When doing so, check that the drinking water connection is not kinked, crushed or twisted. 13