ISPSoft User Manual 20.2.7 Downloading Routing Tables After users make sure that the network architecture they create is correct, they can download the routing tables produced to PLCs. The routing data stored in a PLC is data related to the PLC itself, and therefore the routing tables downloaded to nodes are different. The users have to download the routing tables produced to nodes in the working area. The users can download the routing tables produced to nodes one by one, or download the routing tables produced to nodes at the same time. If the users want to download the routing tables produced to nodes, the Routing Mode checkbox in the Select a Driver window must be unselected.
Single node First, select a node to download and click on the node in the host part from the graphic workspace. Since the routing function only supports AH5x0 series, therefore, selecting other PLC types or devices will be unable to download the Routing Table . After the users click Download to PLC on the PLC menu, or on the toolbar, the Optional Download window will appear. The users can also open the Optional Download window by right-clicking the device they select, and clicking Download to PLC on the context menu. After the users select the Routing Table checkbox in the Optional Download window, and click OK , a routing table will be downloaded to the device. Multiple nodes 20-36