ISPSoft User Manual 20.3.2 Select Master Station Device (Step 1) Only an AH5x0 series CPU module, an AH500 series module, a DVP series PLC, or a DVP series module can be designated as the master station. Not all ports of a PLC or a module can be designated as the master station, and therefore users have to read the usage of the PLC or the module before they designate a port as the master station. Besides, if some of the ports of a node can be designated as masters, the PLC which is a part of the node will execute the PLC Link no matter what port is designated as a master station. (1) Select a port of a node in the Master Device drop-down list box.
Only the ports which can be designated as master stations are listed. (2) After users click , the system will ask the users whether they want to upload the setting related to a PLC Link through the master station. If the users click No , they will be led to the second step. If the users click Yes , the setting related to a PLC Link in the PLC which is a part of the node will be uploaded through the master station, and the data uploaded will be displayed on the screen after the users are led to the third step. Before the users upload the data, they have to make sure of the following points.
(a) The users have to make sure that the computer and the port designated as a master station are connected by means of a communication cable. (b) The users have to make sure that a driver has been created correctly, and the driver status is OK. (c) The users have to make sure that they have completed the communication setting in NWCONFIG. 20-42