Delta ISPSoft — 23.1.2 Setting the Position Planning Table

ISPSoft User Manual 23.1 Position Planning Table 23.1.1 About the Position Planning Table ISPSoft provides an easy table for users to set up the single-axis or 2-axis motion control. It is not required for users to know the complicated motion control rules to complete the setup. Create and download a position planning table and then along with the instructions, the PLC can output axis motions in the set number and order accordingly. 23.1.2 Setting the Position Planning Table Click Wizard (!) > Position Planning Tabl e on the tool bar to open the Position Planning Table window which is categorized into 3 sections as shown in the image shown below.  Icon toolbar:

Provide buttons for various functions with function description explained below.  Parameter setting area: Settings regarding axis control. Upload password protection is used for password setting. Provides axis control mode and motion path setting in the position table.  Setting for Simulator: Use relative mode (symbol/address) or absolute mode (symbol/address) to simulate for the objective position. 23-2