ISPSoft User Manual 3.1.4.6 System Settings – Daylight Saving Timing The parameters on Daylight Saving Timing table are used to enable or disable the function of daylight saving time and set the date when the daylight saving is conducted. The clock will automatically set the daylight saving time in advance based on the period of time set after the function is enabled. Disable/Enable D.S.T Function The parameter sets to enable or disable daylight saving time. Start date- month The parameter sets the month from which the daylight saving time starts. Start date- day The parameter sets the date on which the daylight saving time starts.
End date- month The parameter sets the month in which the daylight saving time ends. End date- day The parameter sets the date on which the daylight saving time ends. Saving time The parameter is used to adjust to the earlier daylight saving time with the unit of minute. 3-92