Chapter 1 Introducing ISPSoft CARD Utility: Users can backup and restore a system through a management wizard and a memory card. It provides various solutions for motion control including PLCopen MC function block, G-code editor, E-CAM editor, positioning planning chart tool and many more. The software can be applied to DVPxxMC series including DVP15MC, DVP15MC-06, DVP50MC and DVP50MC-06. The content description concerning AS series is not applicable for model AS5XX. The content description concerning model AS5XX is only applicable for model AS516E-B 、 AS524C-B.
1.1.2 System Requirements Before using ISPSoft, users have to make sure that an operating system meets the requirements below. 1-3 Item System requirement Operating Windows XP / 7 / 8 / 10 system CPU Pentium 1.5 G or above Memory 256 MB or above (A memory having a capacity of 512 MB or above is Hard disk drive Capacity : 5000 MB or above CD-ROM drive For installing ISPSoft It is optionally required. Monitor Resolution: 800×600 pixels or above (Recommended setting:
1024x768/96 dpi ) Keyboard/Mouse General keyboard/mouse, or device compatible with Windows Printer Printer with a driver for Windows (It is used to print projects, and is optionally required.) RS-232 port For connecting to a PLC Users have to select one of them according to the communication interfaces provided by the PLC or the module used. (*1) USB port For connecting to a PLC Ethernet port For connecting to a PLC