ISPSoft User Manual *1. ISPSoft supports several ways in which a computer is connected to a PLC. Users have to make sure of the ports and the modes supported by a PLC before a computer is connected to the PLC. *2. Please refer to section 1.2 for more information about COMMGR. *3. In addition to ISPSoft, users must use PMSoft version 2.05 or above to develop AH10PM-5A and AH20MC-5A. *4. The functions and specifications mentioned above are only applicable to ISPSoft version 2.00 or above. The older versions may not be equipped with complete functions. 1.1.3 Installing ISPSoft uninstalled first before the latest ISPSoft can be installed.
When the previous version of ISPSoft is detected in a computer, that version is advised to be (1) Start a computer and enter the operating system. Users have to log on to the system as a system administrator before installing ISPSoft. (2) Put an ISPSoft CD in the CD-ROM drive, or download the installation program from the official Delta website http://www.deltaww.com/ to download ISPSoft. (The installation programs need to be decompressed if downloaded from the internet.) (3) Click Start , and Run… to open the Run window. Specify the path denoting the executable file which is used to install COMMGR in the Open box, and then click OK .
Alternatively, users can double-click the icon which is used to install ISPSoft to execute the installation program. 1-4 Item System requirement Communication COMMGR, a communication manager, must be installed on a computer. (*2) software Models which are supported AH500 series PLCs/DVP series PLCs (exclusive of DVP-PM series PLCs)/VFD-C2000 series AC motor drives/VFD-C200 series AC motor drives/VFD-CP2000 series AC motor drives /VFD-E series AC motor drives (*3) PLC: all AH series, AS series and DVP series (except DVP-PM series) AC motor drive: VFD series with PLC built-in Text panel: TP series with PLC built-in