Step 6 Connection ● ● Connect the power supply, K6PM-TH Main Unit and K6PM-THS sensor as follows. L １」 L 2 」 L 7 」 L 8 」 L 3 」 L 4 」 The length of the RS-485 wiring between the Main Unit and infrared thermal sensors is 500 m max. Use commercially available communications cables with one shielded twisted-pair cable (stranded wire, 2-conductor) and AWG24 to AWG16 (0.25 to 1.5 mm 2 ) as the standard. • Recommended cable for use between the Main Unit and infrared thermal sensors Example) If you use the cables bundling RS485 and power cable (AWG 22, 2 pairs, length 6 m), select "2464C BIOS- CL3-AWG22-2P-6". ● ● Connect the PC and the Main Unit by Ethernet cables.
Software tool Ethernet Thermal monitoring device K6PM-TH provided One-to-one connection 10 Models Manufacturer 2464C BIOS series Bando Densen Co., Ltd.