Step 8 How to use dedicated tool At first, the configuration of dedicated tool is explained as follows. The dedicated tool mainly has two mode "setting mode" and "monitoring mode". "Setting mode" is that set the K6PM-TH Main Unit and adjust the sensor position. And then, actually operate by "monitoring mode". Setting Mode Monitoring Mode 14 Mode name Setting, Monitor information Reference on user manual Setting Mode · Write the setting value to any K6PM-TH Main Unit. Temperature unit, Alarm latch, Output inversion, Use running time, Use arrival prediction · Determine the sensor position according to the thermal image which is updated at 1 s cycle, and register the sensor position.
3-3 Registering the Sensor Position (Setting sensor screen) 3-4 Registering the Initial Settings and Sensor Configuration of the Main Unit Monitoring Mode · The information of Multiple K6PM-TH Main Unit can be confirmed on monitor screen at once. · The information of sensor connected any K6PM-TH Main Unit can be confirmed on monitor screen at once. · The information per 16 segments of one unit of target sensor can be confirmed on monitor screen at once. The thermal image in this case is updated at 10 s cycle per one unit of sensor which connected. · Set the threshold value for temperature alarm. The threshold value has an auto calculation function.
4-1 Method of Monitoring the Temperature in the Control Panel 4-3 Alarm Threshold Setting Star mon t itorin top onit oring