1 Confirmation of the sensor connection and Main Unit setting [Setting Mode] (1) Click the below [Setting Mode] Button. (2) If the target sensor No. is confirmed to be connected, " ь " is attached. Select the item of "Set value" and click the [Write] Button, it will be saved in K6PM Main Unit. 15 Item Description Value Reference destination of function details Temperature unit On the Main Unit front-panel, select whether to display the temperature in °C or °F. °C (default), °F --- Alarm latch Select whether to use the function for latching the alarm status of the comprehensive alarm (threshold 1 or 2). ON: Use (default) OFF:
Not used Alarm Latch of the Main Unit on page 4-16 of 4-2-1 Functions of Monitoring the Temperature in Control Panel with the Main Unit and the Software Tool on page 4-13 Output inversion Set the logic of the transistor output method of the comprehensive alarm. ON: Normally open OFF: Normally closed (default) Transistor Output Type of the Main Unit on page 4-15 of same as above Use Running Time Select whether or not to use the Notification of the Main Unit Replacement Timing. ON: Use OFF: Not used (default) Maintenance Forecast Monitor Function on page 4-17 of same as above Use arrival prediction Select whether or not to use the Temperature arrival prediction. ON: Use OFF:
Not used (default) Arrival Prediction on page 4-15 of same as above