Step 4 PC IP address setting Set the PC IP address. Set the IP address to which of the same segment as the K6PM Main Unit. Windows 7 (1) Select [Start] | [Control Panel] | [Network and Internet] | [Network and Sharing Center] | [Change Adapter Settings]. (2) Right-click [Loca Area Connection] and select [Properties]. (3) Select [Internet Protocol Version 4 (TCP / IPv4)] and click [Properties]. Check "Use next IP address" and manually set the IP address address of the computer. Windows 10 (1) Click [Start] and select [Windows System Tools] | [Control Panel]. (2) Select [Network and Internet] | [Network and Sharing Center] | [Change Adapter Settings].
(3) Right-click [Ethernet] and click [Properties]. (4) Select [Internet Protocol Version 4 (TCP/IPv4)] and click [Properties]. Check "Use next IP address" and manually set the IP address of the computer. The PC IP address is "192.168.250.100", since IP address of K6PM is "192.168.250.30" (the default value). The following is the setting screen in Windows10. 8