HP — ADF Belt

To adjust belt tension 1 Make sure the 2 screws (callout 1 in Figure 6-238) on the ADF Motor Unit are loose when you adjust the belt tension. 2 To adjust the belt tension, pull the motor up firmly (by hand only). Note It is very difficult to overtighten the belt tension by hand. A belt that is too loose, however, can adversely affect image quality. 3 Maintaining upward pressure on the motor, tighten the 2 screws (callout 1) on the ADF Motor Unit. C4265-90907 Copy Module ADF Unit Assemblies 545