L-4733A/L-4733AW Operation Guide Overview of the Product Front 22 Letter Name Explanation h Feeding unit Feeds the loaded substrate automatically. i Tape cutter stand Stores tape cutters and cutters used for cutting the substrate. j Switch for changing the feed direction Changes the feed direction for the substrate. Letter Name Explanation a Front cover 1 Open when loading the substrate or performing maintenance. Open front cover 2 to access the heater. b Front cover 2 c Front cover 3 d Control panel (Right) Switches and lamps for operating the press. U “Control panel” on page 24 e Top cover 2 Open when checking the print results, loading the substrate, or performing maintenance.
The light on the other side of the cover is always on. f Pilot lamp Indicates the status of the press with the four-colored pilot lamp. g Ceiling fan A fan for air intake. h Skew roller (Free roller C) Adjust the tilt so that the substrate is fed parallel to the platen. i Curl suppressor (two positions) Place at the edges of the substrate to prevent the substrate from curling.