L-4733A/L-4733AW Operation Guide Overview of the Product Right side 23 Letter Name Explanation j Platen The platform where printing is performed. k Flushing unit Collects waste ink during head maintenance. l Top cover 1 Open when performing maintenance. The light on the other side of the cover turns on when it is opened. m Control panel (Left) Switches and lamps for operating the press. U “Control panel” on page 24 Letter Name Explanation a USB connectors (two positions) USB connectors for a keyboard and mouse. b Touch panel A display for the touch panel system. You can adjust the angle. c Operation table A platform for the keyboard and mouse for operating the touch panel.
d Rewinder Winds up the printed substrate automatically. e Wind Ready switch Stops or starts automatic winding of the substrate. The lamp for the switch also indicates the following statuses. Lit: Ready to start automatic winding. Off: Automatic winding is stopped. Flashing: The roll diameter detection lever is raised. If the roll diameter detection lever is lowered, the lamp turns off. f Set Tension switch Adjusts the winding tension for the substrate. g Initial Wind switch Push after replacing the paper core to prepare for initial winding. Slowly winds up the substrate while pushed down.