L-6534VW Operation Guide Basic Operations J Calculate the adjustment value from the size of the gaps (L) in the ruled lines that you measured. K Press Cancel Job to cancel print adjustment. This completes adjusting using print data with ruled lines. Continue to enter adjustment values and then print. L From the Preset Management menu, enter the adjustment value that you calculated into Reverse Feeding Position Adjustment for the preset for reverse feeding. M Perform printing from the print software, and then check that the print data for this print job was received on the touch panel. N Select the print job from the Job Management menu, and then press Print Settings .
148 Ruled line positions for edge of first copy and edge of second copy Adjustment value Edge of second copy, ruled line on the left L-0.04[mm] Just overlapping -0.04[mm] Edge of second copy, ruled line on the right -(L+0.04)[mm]