L-6534VW Operation Guide Various Print Settings Load the substrate. Print the color plate. White plate printing U “Procedure for white plate printing” on page 178 Perform settings related to additional printing for white plate in Preset for Printing. Remove the substrate on which the color plate was printed from the rewinder side, and load it onto the unwinder side. Perform eye mark detection and sensitivity adjustment for the eye mark sensor. Print one copy, check the print positions of the color plate and the white plate, and perform fine-tuning. Print the white plate.
Necessary settings for color plate printing Preset for Printing Lead Out is the necessary margin left before the print start position when printing the white plate. Also, Lead In is the margin after the last page when printing the white plate. Set Lead In so that you can print including the last page when printing the white plate.
Preset for Reverse Feeding 175 Item Set value Lead In 39 m or more (at a print speed of 30 m/min) U “Setting value for Preset for Printing” on page 69 Lead Out 25 m (at a print speed of 30 m/min) U “Setting value for Preset for Printing” on page 69 Print Method For Reverse White Jobs Color Plate Printing Item Set value Reverse Feeding Apply Eye Mark for Reverse Feeding Use