L-6534VW Operation Guide Various Print Settings Necessary settings for white plate printing Preset for Printing Procedure for color plate printing A Set additional printing for color plate in a preset suitable to the type of substrate loaded, and set it as the default preset. U “Necessary settings for color plate printing” on page 175 U “Creating and Editing Preset for Printing” on page 91 B Set the color plate in the preset for reverse feeding, and set it as the default preset. U “Creating and Editing Preset for Reverse Feeding” on page 95 C Replace the substrate.
U “Replacing the Unwinder Side Substrate” on page 99 U “Replacing the Rewinder Side Substrate” on page 115 U “Setting after Replacing the Substrate (Eye Mark for Reverse Feeding: Use)” on page 121 D Return the adjustment volume on the ionizer to 0. 176 Item Set value Distance from Top Edge of Substrate Apply to print data Distance from Right Edge of Print Job Apply to print data Reverse Feeding Position Adjustment 0 mm Item Set value Additional Printing Apply Eye Mark Horizontal Offset Set the distance from the right edge of the eye mark to the right edge of the print data. See the following when setting a value of more than 500.0 mm.
U “Settings when the Eye Mark Offset exceeds 500 mm” on page 169 Eye Mark Pitch Enter the print data width for color plate Eye Mark Sensor Position Top Corona Treatment Apply Lead In 0 m Lead Out 0 m Print Method For Reverse White Jobs White Plate Printing Rotate 180 Degrees Apply