L-6534VW Operation Guide Various Print Settings Printing Multiple Pages Data without Gaps (Banner Printing) When printing print data for multiple pages, there may be a gap of 1 to 2 mm between pages. In this situation you can remove the gap by setting Banner Printing to Apply in the preset, and the finished job will look like one continuous image. Print data Print result when gaps are left Print result when Banner Printing is set Creating Print Data Note the following points when creating print data for banner printing. ❏ Include the necessary amount of pages for one print data. When print data is divided for each page, the image will not be connected when printing is complete.
❏ Make sure the page length for each page (art board page size) is the same. ❏ Select Collate when printing two or more sections. However, a margin of approximately 2 mm is entered between sections. If you do not want to enter a margin, create print data that includes data for banner printing for the necessary number of copies without performing collated printing. 193