L-6534VW Operation Guide Starting and Ending the Press Daily Maintenance and Shutting Down the Press To shutdown the press, you need to perform Daily Maintenance. A Check that there are no operations being performed such as printing or head maintenance. B When the Operation Status screen is displayed on the touch panel, move the press switch from Standby or Ready to P . C Perform the Daily Maintenance operations displayed on the touch panel. Press Switch Mode , perform the operations displayed, and then enter a check. If you need to switch modes, press Switch Mode displayed on the screen to continue. When Finished is displayed, press it to complete operations.
See the following for more details on the operation procedures for each inspection item. U “Maintenance” on page 238 81