L-6534VW Operation Guide Starting and Ending the Press c Important: Before shutting down, the press performs an auto nozzle check and, if any nozzles are clogged, the press performs head cleaning. If clogged nozzles cannot be cleared even after cleaning, a message is displayed. When a message is displayed, change the press switch from P to Standby , return to the Operation Status screen, and then perform head cleaning again. If the press is left with clogged nozzles, print quality could decline or the press could malfunction. Note: ❏ When performing maintenance, we recommend leaving the substrate in the press as it is. If the substrate is removed, it can take some time to reload.
❏ When you restart the press, the inspection and cleaning screen is displayed. You can skip this screen by pressing Cancel Periodic Maint. D Perform operations for finishing work. (1) Open the top front cover, unwinder roll cover, and the rewinder roll cover on the press. (2) Operate the levers in 2 positions (a) and (b), and then open nip rollers A and B. 82