BODY PANEL REPLACEMENT RE-15 FRONT BODY PILLAR (CUT) REMOVAL (With the cowl top side panel removed.) Cut and Join Location (Cut Location for Supply Parts) [Cut and Join Locations] 50 mm 50 mm 50 mm Cut and Join Location (Cut Location for Supply Parts) Cut with disc sander, etc. 1. Cut and join the parts at the locations as shown above. 2. Cut and join the outer pillar and reinforcement and inner pillar at position shifted about 50 mm (1.97 in.) 3. Cut and join the rocker outer panel and rocker panel reinforcement at position shifted about 50 mm (1.97 in.) mm in. 50 1.97