BODY PANEL REPLACEMENT RE-16 INSTALLATION Inner Pillar Butt Weld Cowl Side Panel Butt Weld Rocker Panel Reinforcement Cut and Join Location 110 mm Outer Pillar Cut and Join Location 60 mm Pillar Reinforcement 1. Install the inner pillar and rocker panel rein- forcement to the vehicle side. 3. Before temporarily installing the new parts. Weld the pillar reinforcement and outer pillar with standard points. 2. Cut the new parts for the outer pillar at the locations as shown above. HINT: After welding the pillar reinforcement finally attach it to the cut and join location tips. mm in. 60 110 2.36 4.33