Last Modified: 6-7-2017 6.8:8.0.40 Doc ID: RM000001890000X agn Model Year Start: 2006 Model: Land Cruiser Prod Date Range: [05/2005 - ] Title: 2UZ-FE CHARGING: GENERATOR: DISASSEMBLY; 2006 MY Land Cruiser [05/2005 - ] DISASSEMBLY 1. REMOVE GENERATOR REAR END COVER (a) Remove the 3 nuts and end cover. (b) Remove the terminal insulator. 2. REMOVE GENERATOR BRUSH HOLDER ASSEMBLY (a) Remove the 2 screws and brush holder. 3. REMOVE GENERATOR PULLEY (a) Hold SST (A) with a torque wrench, and tighten SST (B) clockwise to the specified torque. SST: 09820-63011 Torque: 39 N·m {400 kgf·cm, 29ft·lbf} (b) Check that SST (A) is secured to the rotor shaft. (c) Mount SST (C) in a vise.
(d) Insert SST (B) into SST (C), and attach the pulley nut to SST (C). cardi