cardiagn.com (e) To loosen the pulley nut, turn SST (A) in the direction shown in the illustration. NOTICE: To prevent damage to the rotor shaft, do not loosen the pulley nut more than one half of a turn. (f) Remove the generator from SST (C). (g) Turn SST (B), and remove SST (A and B). (h) Remove the pulley nut and pulley. 4. REMOVE GENERATOR COIL ASSEMBLY (a) Remove the 4 bolts. (b) Using SST, remove the coil assembly. SST: 09950-40011 09951-04020 09952-04010 09953-04020 09954-04010 09955-04071 09957-04010 09958-04011 (c) Remove the generator washer. 5. REMOVE GENERATOR ROTOR ASSEMBLY