cardiagn.com Remove the regulator through the service hole. At the time of reassembly, apply MP grease to the window regulator. NOTICE: At the time of reassembly, please refer to the following item. Do not apply grease to the spring of the window regulator. 16. REMOVE REAR DOOR LOCK ASSEMBLY (a) Remove the screw. (b) Disconnect the connector. (c) Disconnect the link from outside handle. (d) Using a "torx" wrench, remove the 3 screws and door lock through the service hole. "Torx" wrench: T30 (Part No. 09042-00010 or locally manufactured tool) Torque: 5.0 N·m {51 kgf·cm, 44in·lbf} HINT: At the time of reassembly: Apply adhesive to the 3 screws. Adhesive: Part No.
08833-00070, THREE BOND 1324 or equivalent. Remove the protector, and apply MP grease to the sliding and rotating parts of the door lock. 17. REMOVE REAR DOOR OUTSIDE HANDLE ASSEMBLY (a) Remove the 2 bolts and outside handle. Torque: 5.0 N·m {51 kgf·cm, 44in·lbf}