3. System Installation 3.2.3. Connecting the Extension Module to the Left Side of DVP10MC11T as DeviceNet Master 1. Connecting DVPDNET-SL to DVP10MC11T Open the extension module clips on the top left and bottom left of DVP10MC11T and install DVPDNET-SL along four mounting holes in the four angles of DVP10MC11T as figure 3.2.8. Press the clips respectively on the top left and bottom left of DVP10MC11T to fix the module tightly and ensure that their contact is normal. 2 DVPDNET DVP10MC S/S I0 I1 I2 I3 I4 I5 I6 I7 1 UP ZP Q0 Q1 Q2 Q3 2 Figure 3.2.8 2.
Installing DVP10MC11T and DVPDNET-SL into the DIN rail Use standard 35mm DIN rail; Open DIN rail clips of DVP10MC11T and DVPDNET-SL and then insert the two modules in DIN rail. Press the DIN rail clips into DVP10MC11T and DVPDNET-SL to fix the two modules in DIN rail as figure below. 35mm DIN Rail Figure 3.2.9 DVP-MC operating manual 3-7 DVPD NET DVP10MC S/S I0 I1 I2 I3 I4 I5 I6 I7 UP ZP Q0 Q1 Q2 Q3