B Q : Explains the system outline. R : Indicates values or explain the function for reference during troubleshooting. S : Indicates the reference page showing the position on the vehicle of the parts in the system circuit. Example: Part “P 4” (Power Window Master SW) is on page 21 of the manual. * The letter in the code is from the first letter of the part, and the number indicates its order in parts starting with the letter. Example: P 4 Part is 4th in order Power Window Master SW T : Indicates the reference page showing the position on the vehicle of Relay Block Connectors in the system circuit. Example:
Connector “1” is described on page 16 on this manual and is installed on the left side of the instrument panel. U : Indicates the reference page showing the position on the vehicle of J/B and Wire Harness in the system circuit. Example: Connector “3B”connects the Cowl Wire and J/B No. 3. It is described on page 14 of this manual, and is installed on the instrument panel left side. V : Indicates the reference page describing the wiring harness and wiring harness connector (the female wiring harness is shown first, followed by the male wiring harness). Example: Connector “ID1”connects the front door RH wire (female) and cowl wire (male).
It is described on page 26 of this manual, and is installed on the right side kick panel. W : Indicates the reference page showing the position of the ground points on the vehicle. Example: Ground point “IC” is described on page 24 of this manual and is installed on the cowl left side. X : Indicates the reference page showing the position of the splice points on the vehicle. Example: Splice point “I 5” is on the Cowl Wire Harness and is described on page 24 of this manual. HINTS: Junction connector (code: J1 to J19) in this manual include a short terminal which is connected to a number of wire harnesses. Always perform inspec- tion with the short terminal installed.
(When instal- ling the wire harnesses, the harnesses can be con- nected to any position within the short terminal grouping. Accordingly, in other vehicles, the same position in the short terminal may be connected to a wire harness from a different part.) Wire harness sharing the same short terminal grouping have the same color. 7