LVS-7500 External System Installation and Quick Start Guide 7. Using the 5/32” Allen key, insert the two (2) screws removed from the previous step into the screw openings on the docking plate. 8. Place the docking plate on top of the horizontal mounting bracket with the white strip facing toward the printer location (see “A” below). Center the docking plate between the two brackets that support the internal rewind bar (see “B”). This step explains how to mount the docking plate onto the horizontal mounting bracket; future steps in this section explain how to correctly align the docking plate to the printhead. LVS-7500 External System Installation and Quick Start Guide Page 31 of 45