● In some situations the system may incorrect- ly interpret an intentional driving manoeuvre for lack of alertness from the driver and an indication for weariness. – Briefly press to set the minutes. Num- bers are displayed in ascending order. Keep the – Press the button again to conclude the clock setting. button pressed to run fast forward. ● No critical alarm is sounded for the so called “microsleep (napping at the steering wheel)” episodes! ● Pay attention to the indications on the in- strument cluster display and follow the cor- responding instructions.
Time setting by way of the digital instrument cluster (Active Info Display) – On the menu Trip data , select the Range display. – Keep the OK button on the multifunction steering wheel pressed for about five seconds, upon release, the services menu will be dis- played on the digital instrument cluster display → page 25. The alertness detection system was solely developed for driving on highways and well paved roads. In case of malfunction, seek assistance from a Volkswagen Dealership. – Select the Time menu. – Set the time with the arrow buttons or . Time Services Menu Please refer to at the start of the chapter on page 15. Please refer to at the start of the chapter on page 15.
Time setting by way of the radio system Depends on the radio and vehicle version. – Press the radio button. Depending on the vehicle version, settings may be configured using the Service menu of the digi- tal instrument cluster (Active Info Display). – Touch the function button to open the Vehi- cle Settings menu. Open the Service menu in the digital instrument cluster (version 1) On the Journey data menu of the instrument clus- ter select the Range indicator and keep the OK button on the multifunction steering wheel pressed for about five seconds, upon release the Service menu is displayed. Browse through the menu using the multifunction steering wheel buttons.
– Select the menu item Date and time to set the time → page 28. – OR – Press the settings button . – Touch the Car function button to open the menu. – Select the menu item Date and time to set the time → page 28. Open the Service menu in the digital instrument cluster (version 2) Access the Travel type/trip information profile. On the Travel type/trip , press and hold or on the multifunction steering wheel in the same direc- tion for 6 seconds. Browse through the menu us- ing the arrow buttons and . Time setting by way of the analogue instrument cluster – Switch on the ignition.
– To adjust the clock, press the button on the instrument cluster → page 15 to select the hour indicator. Reset the service interval display Select the Service menu and follow the instruc- tions on the digital instrument cluster display. – Briefly press button to set the hour. Numbers are displayed in ascending order. Keep the button pressed to run fast for- ward. 25A.5L1.POL.20 – Briefly press the button to select the mi- nutes indicator. Driver's information 25