Reset the oil change service Select the Reset oil service menu and follow the in- structions on the digital instrument cluster dis- play. The service interval indicators show on the in- strument cluster display → Fig. 18 or on the radio system display. There being different instrument cluster and ra- dio system versions available, display indications may vary. Reset the inspection service Select the Reset inspection menu and follow the in- structions on the digital instrument cluster dis- play. Service warning When a service is becoming due, a service warn- ing is displayed when turning the ignition on.
Reset the trip recorder To reset the trip recorder, select the Reset trip menu and follow the instructions on the digital instrument cluster display. The mileage or specified interval time correspond to the mileage or interval until the next service. Service reminder When a service is about to become due a warn- ing is sounded and, for a brief instant, the wrench icon may be displayed on the instru- ment cluster display along with other exhibits → Fig. 18 . Engine code Select the Engine code menu. The engine code is displayed on the digital instrument cluster dis- play. Set the time Select the Time menu and set the correct time with the arrow buttons or .
Access the service deadline With the ignition turned on and the vehicle sta- tionary, it is possible to access the current service deadline. Copyrights Select the Copyright menu to access copyright in- formation. Service deadline access via the radio system, de- pends on the vehicle and radio versions. – Press the radio button. Service interval display – Touch the function button to open the Vehi- cle Settings menu. Please refer to at the start of the chapter on page 15. – Select the Service item on the menu to display the service information. – OR – Press the settings button . – Touch the Car function button to open the menu.
– Select the Service settings item on the menu to view service information. Vehicles with analogue instrument cluster. – Press and hold the button on the instru- ment cluster pressed until the word Service ap- pears on the display. – Release the button and wait for approximately two seconds or press the button. The current service interval is displayed. Fig. 18 On the instrument cluster display: indica- tion example of a service event soon to become due (schematic representation). Vehicles with Digital instrument cluster (Active Info Display). – The interval can be consulted via the Services menu → page 25. Owner's Manual 26