7. FUEL INJECTION PUMP/GOVERNOR Point 3 [Disassemble] There is an acoustic material part to name as fuel injection pump spacer between the fuel injection pump and the cylinder block. Loosen fuel injection pump installation bolts with a closed wrench when disassembling a fuel injection pump. [NOTICE] An intake manifold may obstruct the disassembly of the fuel injection pump by the engine model. Remove the fuel injection pump after removing the intake manifold first. [Reassemble] When installing a fuel injection pump on the gear case, put a fuel injection pump spacer between the cylinder blocks, and install it. 82E-5 – 98E-5 SERIES 7-5