Sensors and Charging Contacts Dust Compartment * Weekly cleaning is recommended. Use a soft cloth to clean all sensors and charging contacts in the vacuum-mop: 1. Open the vacuum-mop cover, then pinch the dust compartment clip to remove the dust compartment. · The four cliff sensors on the bottom. · The charging contacts on the bottom. · The edge sensor on the side of the vacuum-mop. · The bumper and the obstacle sensor on the front of the vacuum-mop. · The LDS laser sensor on the top of the vacuum-mop. Obstacle Sensor LDS Laser Sensor Cliff Sensor 2. Open the dust compartment cover as indicated by the diagram. Charging Contacts Note:
To prevent the filter from becoming clogged, lightly tap the dust compartment when emptying its contents. Edge Sensor Collision Buffer 15