3. Remove the filter, as illustrated, then rinse it out and lightly tap on the edge of the filter to remove dust and debris. Mop Pad * After-each-use cleaning is recommended Note: Do not attempt to clean the filter with a brush or finger. 1. Pull the mop pad off the water tank to remove it. 2. Clean and dry the mop pad. 4. Place the dust compartment and filter aside to dry before reinstallation. Remove the pad from the water tank before cleaning it, and make sure dirty water does not flow back into the water outlet to avoid clogging. Do not press too hard on the mop pad, as this can hinder its performance. Pad should be cleaned before each use. Note:
It is recommended to change the mop pad every 3 to 6 months. Note: Filter must be fully dry before use. 15