Battery Restoring Factory Settings The vacuum-mop contains a high-performance lithium-ion battery pack. Please ensure that it remains well-charged during daily use to maintain optimal battery performance. If the vacuum-mop does not function properly after being restarted, use a pin to press the reset button until you hear a voice saying "Restoring factory settings". This will reset the vacuum-mop to its original factory settings. Note: If the vacuum-mop is not used for an extended period, turn it off and put it away. To prevent damage from over-discharging, the vacuum-mop should be recharged at least once every three months.
Charging Dock Clean the contacts of the charging dock with a soft cloth. Updating the Firmware You can update the firmware via the app. Before updating, make sure the vacuum-mop is on the charging dock and has at least 15% battery left. Restarting the Vacuum-mop If the vacuum-mop stops responding or cannot be turned off, press and hold down the button for 10 seconds to forcefully turn it off. Then press and hold the button for 3 seconds to turn the vacuum-mop on. Resetting Consumables Open Mi Home/Xiaomi Home app, select Mi Robot Vacuum-Mop 2 and then tap " " to open the setting in the top right corner.
Select Consumables and choose the accessory you want to reset, then follow the instructions in the app to complete the resetting. 16