Routine Maintenance Brush Dust Compartment and Filter 1. Flip the vacuum-mop over and pinch the clips to remove the brush cover. 2. Lif the brush out of the vacuum-mop, then clean the brush bearings. 3. Use the included brush cleaning tool to remove any hairs tangled on the brush. 4. Reinsert the brush, then put the cover back on and press on it until the clips lock into place. 1. Open the vacuum-mop cover, then pinch the dust compartment clip to remove the dust compartment. Note: Weekly cleaning is recommended. Note: It is recommended to clean the brush weekly and replaced every 6 to 12 months. Brush Cover Clips Brush Brush Bearings 2.
Open the dust compartment cover as indicated by the diagram. Using the Brush Cleaning Tool 12