printing on special media envelopes and cards Print envelopes and cards from tray 1 or the optional multipurpose tray. Use the rear manual feed for printing a single envelope (20 to 24 lb bond) or card (61 to 110 lb index). You can load up the multipurpose tray with as many as 10 envelopes or 10 cards (10 mm, or 0.4 inch, stacked). To print single envelopes or cards using the rear manual feed: In the printer driver, select Manual Feed as the media source, and then select the envelope or card size. Click OK. When the LCD control panel displays MANUALLY LOAD [TYPE] [SIZE] , insert an envelope or card of the correct size and type along the left side of the tray.
Envelopes have to be inserted with the short edge of the envelope feeding into the printer, the flap facing down, and the stamp corner against the left side of the tray, looking at printer from back. Push the media into the printer until you feel some resistance. Take care not to force media into the feed slot. After each item prints, the printer prompts you to load another item of media. Load media as needed until the printer finishes printing.Other print jobs will not continue until the job in tray 1 is finished. To print multiple envelopes or cards using the multipurpose tray:
Insert as many as 10 envelopes or cards into the multipurpose tray, and position them against the right side of the tray (facing front). Envelopes should be placed with the flap facing down and the stamp corner against the right side of the tray. In the printer driver, select Tray 1 as the media source, and then select the envelope or card size. Print the document. transparencies Use Tray 1 or the optional multipurpose tray (if installed) to print on transparencies.
(If the optional multipurpose tray is not installed and you want to print multiple transparencies, use Tray 2 or Tray 3.) When Tray 2 or Tray 3 is configured in the LCD control panel to print transparencies, the printer optimizes the printing process to allow the transparencies to dry completely. Load a maximum of 50 transparencies in Tray 2 or Tray 3, and up to 20 transparencies in the optional multipurpose tray. Tray 1 loads a single transparency at a time. Handle transparencies using the edges. Oils from your fingers can cause print quality problems.
Use HP Premium Plus Inkjet Transparency Film, which is specifically designed to work with your printer, or use other transparencies designed to work with HP Inkjet printers. 3-12 hp restricted use and maintain