troubleshooting print quality related problems use and maintain hp restricted 3-105 symptom solution printout is slanted or skewed make sure media guides are snug If media is twisting as it feeds or margins appear crooked, the media guides might not be pressed snugly but gently against the stack. Both the media length and width guides must be gently pressed against the stack. placement of the text or graphics is wrong make sure the media size or orientation settings are correct Make sure the media size and page orientation selected in the software application match the settings in the printer driver.
make sure the media is loaded correctly If everything on the page is slanted or skewed, check the following: Make sure the media width and length guides fit snugly against the edges of the stack. For the optional multipurpose tray, make sure that no more than 100 sheets of media or 20 transparencies (up to 10 mm or 0.39 inch, stacked) are loaded in the tray. For Tray 2, make sure that no more than 300 sheets of media (up to 30 mm or 1.18 inches, stacked) are loaded in the tray. For Tray 3, make sure that no more than 700 sheets of media (up to a 70 mm or 2.80 inches, stacked) are loaded in the tray. Trays 2 and 3 can hold a maximum of 50 transparencies.
make sure the margin settings are correct If the text or graphics are cut off at the edges of the page, make sure the margin settings for the document do not exceed the printable area of your printer. text or graphics are cut off at the edges of a page make sure the orientation settings are correct The page orientation selected might not be correct for the document you are printing. make sure the margin settings are correct If the text or graphics are cut off at the edges of the page, make sure the margin settings for the document do not exceed the printable area of your printer. make sure the content fits on the page Content that is cut off might be outside the printable area.
Or, the size of the document you are printing is larger than the media size in the main tray. Check if the layout of the document you are trying to print will fit on a media size supported by the printer, and then load the correct media size. Make sure to select the correct page orientation. make sure the media is loaded correctly Make sure the media width and length guides fit snugly against the edges of the stack. Also, make sure that the correct page orientation is selected.