installing the hp jetdirect EIO print server The hp business inkjet printer 3000n/3000dtn has a preinstalled HP Jetdirect 615n (EIO) internal print server. If you have purchased an hp business inkjet printer 3000, purchase the internal HP Jetdirect print server separately.The embedded web server for printer and supplies management is included on the HP Jetdirect 615n (EIO) internal print server. The hp Jetdirect printer server can be used in both client-server and peer-to-peer network configuration. The hp business inkjet printers 3000n and 3000dtn both include the HP JetDirect print server.
Note The hp Jetdirect EIO print server contains electronic components that can be damaged by static electricity. To prevent the build up of static electricity: Caution • Maintain contact with a bare sheet metal surface on the printer. • Wear a grounding wrist strap. • Handle the print server with caution. • Avoid touching the electronic components or circuit paths. • • Turn off the printer and unplug the power cord. Choose which slot to use. Both slots work, but slot 2 is recommended, as it makes for a more convenient network cable path. Unscrew and remove the metal plate at the rear of the printer. Insert the print server by aligning it with the guide rails in the printer.
Press the print server into the slot. Tighten each screw until both the screws are secure. Connect the network cable to the print server. 2-18 hp restricted setup & configure