Section 4: CS / CJ Configuration 1. Launch the Network Configurator for EtherNet/IP, found in the CX One or Sysmac Studio group in the Windows Start menu. 2. Create a new project for EtherNet/IP. 3. From the tree on the left, drag and drop the appropriate PLC and an NX-CSG320 onto the blank diagram in the center window of the Network Configurator. 4. Right click on each of the devices in the center window and select Change Node Address. Set the correct IP Address for each device, so that it matches the hardware. For this example, the NX-CSG320 has an IP Address of 192.168.1.226 and the CS1 has an IP Address of 192.168.1.227.