5. The EtherNet/IP configuration made in the NX-CSG320 using Sysmac Studio needs to be uploaded into the Network Configurator for EtherNet/IP, to be able to make a connection from the CS1 PLC. To begin this process select the method to connect to the NX-CSG320 by clicking Option / Select Interface, and select Ethernet I/F. 6. Assign your PC an IP Address on the same network segment as the PLC, such as 192.168.1.228. 7. Click the Connection icon. 8. If there are multiple network interfaces on your PC, select the correct one.