Load Cell Module DVP02LC-SL 8. Click “Weight Base Point Command” to set up the weight base point. Now, the weight at CH1 is 1,000kg. 8 Application Examples „ Tension Control This is an example of using DVP02LC-SL in a tension control application. The main processing unit is DVP-SX2 series PLC (DVP20SX2), responsible for the PID operation. The DVP02LC-SL is used for detecting the tension of the load cell. The measured value is outputted to the brake system from the DVP04DA-SL analog output module after the PID operation is done by DVP20SX2 in order to control the tension. See the figure below for the tension control demonstration.
Load cell Load Cell Material feeding motor Material winding spindle motor 04DA 02LC 20SX2 DVP-PLC Operation Manual 31