Flags related to analog input: Note: The single analog input terminal GND must be connected to SG (common ground). 2. Description of new special auxiliary relays and special data registers Descriptions of special auxiliary relays: Descriptions of special data registers: Device number Function M1588 The input value of AD0 is greater than the maximum value. (The conversion value gotten is greater than 4047 (voltage)/2023 (current).) M1589 The input value of AD1 is greater than the maximum value. (The conversion value gotten is greater than 4047 (voltage)/2023 (current).) Off STOP RUN Special EH3 Function Attribute Latching Default M SV2 On RUN STOP M1326* Fifth group:
CH4 (Y10/Y11) completes the production of pulse output. 24SV2 Off Off - R/W No Off M1327* Sixth group: CH4 (Y12/Y13)) completes the production of pulse output. 24SV2 Off Off - R/W No Off M1568 Fifth group: Users can set the time it takes for CH4 (Y10/Y11) to decelerate the production of pulse output. It is used with D1196. 24SV2 Off - - R/W No Off M1569 Sixth group: Users can set the time it takes for CH5 (Y12/Y13) to decelerate the production of pulse output. It is used with D1197. 24SV2 Off - - R/W No Off M1588* The input value of AH0 is greater than the maximum value. 24SV2 Off Off - R No Off M1589* The input value of AD1 is greater than the maximum value.
24SV2 Off Off - R No Off Off STOP RUN Special EH3 Function Attribute Latching Default D SV2 On RUN STOP D1022 Fifth group: Frequency with which the first section of the pulse output produced by CH4 (Y10/Y11) starts, and frequency with which the last section of the pulse output produced by CH4 (Y10/Y11) ends. 2S4V2 - - - R/W Yes 200