Downloaded from https://www.everyspec.com MIL-STD-31000 FIGURE 1: TDP Option Selection Worksheet 16 TDP OPTION SELECTION WORKSHEET SYSTEM: DATE PREPARED: A. CONTRACT NO. B. EXHIBIT/ATTACHMENT NO. C. CLIN D. CDRL DATA ITEM NO(s). 1. TDP Level (X and complete as applicable .) A. CONCEPTUAL LEVEL DEVELOPMENTAL LEVEL PRODUCTION LEVEL B. REMARKS: 2. TYPE AND FORMAT (X all that apply and complete as applicable .) A. TYPE 2D: 2D DRAWINGS TYPE 3D: 3D MODELS ONLY TYPE 3D: 3D MODELS WITH ASSOCIATED 2D DRAWINGS B.
NATIVE CAD (SPECIFY TYPE) ____________________________________ ISO 10303 STEP FORMAT (Specify STEP PROTOCOL AP203, AP 214 etc.) ______________________________________________________________ ISO 32000 PORTABLE DOCUMENT FORMAT ________________________ OTHER ELECTRONIC FORMAT (SPECIFY TYPE) ______________________________________________________________ HARDCOPY ___________________________________________________ REMARKS : ______________________________________________________ 3. CAGE Code AND DOCUMENT NUMBERS A. CONTRACTOR CAGE AND DOCUMENT NUMBERS GOVERNMENT CAGE (COMPLETE 3B & 3C OR 3D) D. To Be Assigned By: B. USE CAGE CODE: C. USE DOCUMENT NUMBERS: 4.
DRAWING FORMATS (X one and complete as applicable) CONTRACTOR FORMAT. GOVERNMENT FORMAT. REMARKS: ______________________________________________________________________________________ 5. TDP ELEMENTS REQUIRED (X all that apply ) ELEMENTS REQUIRED TO BE DETERMINED BY CONTRACTOR - OR THE FOLLOWING ARE REQUIRED:
CONCEPTUAL DRAWINGS/MODELS AND ASSOCIATED LISTS DEVELOPMENTAL DESIGN DRAWINGS/MODELS AND ASSOCIATED LISTS PRODUCT DRAWINGS/MODELS AND ASSOCIATED LISTS COMMERCIAL DRAWINGS/MODELS AND ASSOCIATED LISTS QUALITY ASSURANCE PROVISIONS SPECIAL INSPECTION EQUIPMENT (SIE) DRAWINGS/MODELS AND ASSOCIATED LISTS SPECIAL TOOLING (ST) DRAWINGS/MODELS AND ASSOCIATED LISTS SPECIFICATIONS SOFTWARE DOCUMENTATION SPECIAL PACKAGING INSTRUCTIONS (SPI) DRAWINGS/MODELS AND ASSOCIATED LISTS 6. ASSOCIATED LIST (X and complete as applicable) A. PARTS LIST (X ONE) (1) INTEGRAL (2) SEPARATE B. DATA LISTS (X ONE) (1) NOT REQUIRED (2) REQUIRED (SPECIFY LEVELS OF ASSEMBLY) C.
INDEX LISTS (X ONE) (1) NOT REQUIRED (2) REQUIRED (SPECIFY LEVELS OF ASSEMBLY) D. WIRING LISTS (X ONE) (1) NOT REQUIRED (2) REQUIRED (SPECIFY LEVELS OF ASSEMBLY) E. INDENTURED DATA LISTS (X ONE) (1) NOT REQUIRED (2) REQUIRED (SPECIFY LEVELS OF ASSEMBLY) F. APPLICATION LISTS (X ONE) (1) NOT REQUIRED (2) REQUIRED (SPECIFY LEVELS OF ASSEMBLY) 7. APPLICABILITY OF STANDARDS. The following Standards apply: (X as applicable) ASME Y14.100 ENGINEERING DRAWING PRACTICES WITH APPENDICES:
B C D E ASME Y14.24 TYPES AND APPLICATIONS OF ENGINEERING DRAWINGS ASME Y14.34 ASSOCIATED LIST ASME Y14.35M REVISION OF ENGINEERING DRAWINGS AND ASSOCIATED LIST ASME Y14.41 DIGITAL PRODUCT DEFINITION DATA PRACTICES ASME Y14.5 DIMENSIONING AND TOLERANCING OTHER STANDARDS APPLY AS DESCRIBED: COMPANY STANDARDS PERMITTED YES NO 8. OTHER TAILORING (Attach additional sheets as necessary)