Downloaded from https://www.everyspec.com MIL-STD-31000B 4.5 TDP data management products. TDP data management products listed below are used by the procuring activity to control and manage the TDP development process and shall be delivered in accordance with the contract and TDP Option Selection Worksheet. Other TDP data management products in addition to those listed below may also be required as stated in the contract. a. Technical Data Package List (TDPL). b. Document number assignment report. c. Proposed critical manufacturing process description. d. Source control approval request. e. Engineering drawing tree 4.6 TDP metadata.
Metadata consist of data from and about TDP elements and is used by the procuring activity to manage the TDP development process and to better acquire and support the end product defined by the TDP. When metadata is required, it shall be delivered in accordance with the contract. 4.7 Supplementary technical data. TDP supplementary technical data are deliverable data products used by the procuring activity to better acquire and support the end product defined by the TDP. When supplementary technical data is required, it shall be delivered in accordance with the contract. 5. DETAILED REQUIREMENTS. 5.1 General.
TDPs define the physical and functional characteristics of the accepted configuration of the item and its subordinate assemblies, subassemblies, and parts. See Appendix A for guidance on selection of TDP elements and data management products. 5.2 TDP levels. 5.2.1 Conceptual level. A conceptual TDP shall consist of those TDP elements necessary to define design concepts, and include the appropriate information required for analysis and evaluation of those concepts. The data will generally consist of simple sketches/models, artist renderings and/or basic textual data.
The data may consist of the system performance specification (see 5.4.4) and conceptual design data (see 5.4.1.1) as specified by the contract. 5.2.2 Developmental level. A developmental TDP shall consist of those TDP elements necessary to provide sufficient data to support the analysis of a specific design approach, the fabrication of prototype materiel for test or experimentation, and limited production by the original design activity or with assistance from the original design activity.
The data may consist of the unique item specifications (see 5.4.4) for all system Configuration Items (CIs) and developmental design data and any required associated lists (see 5.4.1.2) as specified by the contract. 5.2.3 Product level. A product level TDP shall consist of those TDP elements necessary to provide the design, performance requirements, engineering, manufacturing, inspection, packaging and quality assurance provision information necessary to fully define the item and enable the procurement or manufacture of an item.
The product shall be defined to the extent necessary for a competent manufacturer to produce an item, which duplicates the physical, interface, and functional characteristics of the original product, without additional design engineering effort or recourse to the original or current design activity. Product data shall reflect the approved, tested, and accepted configuration of the defined delivered item. The data may consist of product design data with all required associated lists (see 5.4.1.3); SIE design data with all required associated lists (see 5.4.2); special tooling design data 12